1. Selection of good tarpaulin tent site
The support of the tent should be chosen in a relatively flat place, the entrance and exit should be facing away from the air outlet, and the ground should be relatively dry. If the lawn is thin and the ground has a slight slope, the outlet should be selected on the downhill to facilitate ditching and drainage.
2. Support and fixation.
After the tent is unfolded, first fix the four corners of the inner tent so that the bottom of the tent is placed flat on the ground. If possible, you can put a cushion under the tent, which can not only protect the bottom of the tent, but also have a good waterproof effect. When setting up an outdoor tent, in addition to being reliably connected to the tent pole, special attention should be paid to pulling the leash so that the outdoor tent is tightened to achieve a good rainproof effect. Tents with skirts should be compacted with soft soil or sand. , Snow pressure can also be used in winter, which is more conducive to wind protection. The fixation of ground nails should have an inclination angle, the best angle is 35-45 degrees. The distance and direction of the ground nails into the ground should be on the same axis as the rope. Stress strength. Pay attention to the corresponding fixation in the fixing sequence, for example: left front corner, right rear corner, right front corner, left rear corner. After the whole tent is fixed, adjust the tension line of the rope to keep the tension in all aspects consistent. After setting up the tent, check the distance between the inner and outer tents. If they are pasted together, it will affect the rain and dew protection and should be adjusted. Front right corner, rear left corner in turn. After the whole tent is fixed, adjust the tension line of the rope to keep the tension in all aspects consistent. After setting up the tent, check the distance between the inner and outer tents. If they are pasted together, it will affect the rain and dew protection and should be adjusted. Front right corner, rear left corner in turn. After the whole tent is fixed, adjust the tension line of the rope to keep the tension in all aspects consistent. After setting up the tent, check the distance between the inner and outer tents. If they are pasted together, it will affect the rain and dew protection and should be adjusted.
3. Dig drainage ditches
When camping, if it rains, the trenching procedure cannot be omitted. The gutter should be close to the outer edge of the tent. If the tent has no skirt, the gutter should be located so that water from the tent can enter the ditch. There are drainage ditches around the tent to facilitate the drainage of accumulated water.
Linyi Jincang Plastic Products Co., Ltd was established in 1995, it is one professional manufacturer of plastic tarpaulin located in Linyi city, which is Chinese famous tourist and logistics city. We are only 3 kilometers away from Linyi high-speed Railway station. There are 1 00 water jet looms, 150 circular looms, 6 drawing machines and 3 coating machines, with advanced production equipment, we can produce 20,000 tons of PE/PP/PVC tarpaulins from 50gsm to 1000gsm and pp woven bag for multipurpose in many different fields such as construction, transportation and agriculture.
As a professional manufacturer and supplier, we provide high-quality products. If you are interested in our products or have any questions, please feel free to contact us.
